NAPA - Master International Distributor | CTI | FasTrak

2500C-8-IDI-120V 8 Isolated 120/240V AC/DC Compact Digital Inputs

The 2500C-8-IDI-120V module accepts a wide range of voltage signals. It is designed to accept both AC and DC voltage allowing the user to pick and choose ranges on a single module. Motor centers, optical sensors, limit switches and utility control are excellent examples of applications for this product. Product Bulletin

2500C-8-IDI-24V 8 Isolated 24V AC/DC Compact Digital Inputs

The 2500C-8-IDI-24V module accepts a wide range of voltage signals. It is designed to accept both AC and DC voltage allowing the user to pick and choose ranges on a single module. Motor centers, optical sensors, limit switches and utility control are excellent examples of applications for this product. Product Bulletin

2572-A

2572-a

Mature product – see 2572-B The 2572-A Ethernet TCP/IP Adapter is the next generation Ethernet interface module for CTI 2500 Series® or Simatic® 505® controllers. The 2572-A provides connectivitly to networks using  IEEE 802.3, Ethernet II and Transmission Control/Internet Protocol standards, at 10M or 100M speeds.

2572-AF

2572-af

Mature product. See 2572-A The 2572-AF Fast Ethernet TCP/IP Adapter replaces the RJ45 connection on the 2572-A with an MTRJ 100 Mbit direct fiber interface.  The 2572-AF provides connectivitly to networks using  IEEE 802.3, Ethernet II and Transmission Control/Internet Protocol standards, at 100M speeds.

2510 125 VDC power supply

2510__125_vdc_power_supply

Mature product _ see 2512 The 2510 is a 125 VDC power supply for CTI 2500 Series® or Simatic® 505® Programmable Controllers. Systems that operate from 125 VDC batteries can use the 2510 to provide power.  Note that the 2510 is available by special order only. Available upon request. Minimum quantity : 10 pieces.

2500-RIO-A RS485 REMOTE BASE CONTROLLER

2500-rio-a____rs485_remote_base_controller

Obsolete _ Replaced by 2500-RIO-B The 2500-RIO-A RS485 Remote Base Controller allows control of a remotely-located CTI 2500 Series® or Simatic® 505®  I/O base over a twisted-pair RS485 cable up to 1000m from the CPU.

2515

2515

Obsolete _ Replaced by 2515-A The 2515 is a 120 VAC  power supply for CTI 2500 Series® or Simatic® 505® Programmable Controllers. The 2515 provides up to 100 watts of power for use by the CPU and I/O modules.

2500-R4

2500-r4

(Mature product replaces by 2500P-R4) The 2500-R4 provides four slots for industrial I/O for your CTI 2500 Series®or Simatic® 505® system. The bases provide space for a power supply, Processor or Remote Base Controller (RBC), and slots for up to 4 I/O modules.

2500-R8

2500-r8

(Mature product) The 2500-R8 provides eight slots for industrial I/O for your CTI 2500 Series® or Simatic® 505® system. The bases provide space for a power supply, Processor or Remote Base Controller (RBC), and slots for up to 8 I/O modules.

2500-R16-A

2500-r16-a

(Mature product) The 2500-R16-A provides sixteen  slots for industrial I/O for your CTI 2500 Series® or Simatic® 505® system. The bases provide space for a power supply, Processor or Remote Base Controller (RBC), and slots for up to 16 I/O modules.

Page 1 sur 41234